1. Consistent 2 to 6 mm Rope:
The APPL/26/4/8 is set up to produce rope across the full 2 to 6 mm range. Rope diameter stays consistent from length to length.
The APPL/26/4/8 Rope Making Machine 2-6 mm from Aawadkrupa Plastomech Pvt. Ltd. is a 4 ply machine with a 4 X 2 = 8 bobbin configuration, producing rope from 2 to 6 mm. Supplied in the standard build, it carries two sets of bobbins for higher output in our 2-6 mm range.
Built for steady rope manufacturing, the machine holds consistent twist so rope quality stays even from length to length. High-quality materials and components in the frame, drive and bobbin assembly stand up to the demands of continuous production, giving reliable operation with low maintenance and durable construction throughout.
Operation is straightforward, so experienced operators and those new to rope making can set and repeat parameters quickly and keep production efficiency high. Rope can be made from nylon, polypropylene, polyester, jute and similar materials for industrial applications including fishing, construction, agriculture, marine and general-purpose use.
The APPL/26/4/8 is set up to produce rope across the full 2 to 6 mm range. Rope diameter stays consistent from length to length.
The machine lays 4 ply rope in a single pass. This suits the twines, cords and light ropes most commonly made in this size range.
Two sets of four bobbins run in parallel, lifting output per machine. More rope is produced in the same floor space.
Nylon, polypropylene, polyester, jute and similar materials can all be run on this model. One machine therefore covers several product lines.
High-quality materials and components are used throughout the frame, drive and bobbin assembly. The machine stands up to the demands of continuous production.
Controls are straightforward for both experienced operators and newcomers, and accessible components keep routine servicing simple. Training time stays short.
After-sales and technical support is available globally for installation, operation and upkeep. Issues are addressed promptly so production keeps running.
Standard configuration of the APPL/26/4/8 Rope Making Machine 2-6 mm. Every machine can be tailored to your rope size and output.
Send Enquiry| Model No. | APPL/26/4/8 |
|---|---|
| In Standard | Yes |
| In PLC Based | No |
| No. of Ply | 4 |
| Rope Size | 2 to 6 mm |
| No. of Bobbin | 4 X 2 = 8 |




Fill out the below form and our experts will touch with you within 24 hours.
Common questions about the appl/26/4/8 rope making machine 2-6 mm.
Still have a question?
Ask on WhatsAppThe APPL/26/4/8 produces rope from 2 to 6 mm, as listed in the model table for our Rope Making Machine 2-6 mm range.
The APPL/26/4/8 is a 4 ply machine with a 4 X 2 = 8 bobbin configuration, supplied in the standard build. Actual output per shift depends on rope size, material and twist, so share your requirement and we will confirm the figures for your application.
It is used to make rope from nylon, polypropylene, polyester, jute and similar materials for industrial applications including fishing, construction, agriculture, marine and general-purpose use.
The APPL/26/4/8 combines the full 2 to 6 mm rope range with a simple 4 ply, 8 bobbin layout, durable construction, easy operation and low maintenance, which suits units starting or expanding rope production.
USA | China | Japan | South Korea | Taiwan | Singapore | Malaysia | Thailand | Indonesia | Vietnam | Philippines | Sri Lanka | Bangladesh | Saudi Arabia | UAE | Turkey | Germany | France | United Kingdom | Italy | Spain | Netherlands | Poland | Switzerland | Sweden | Belgium | Austria | Norway | Denmark | Finland | Czech Republic | Hungary | Slovakia | Greece | Portugal | Romania | Bulgaria | Canada | Mexico | Brazil | Argentina | Chile | Colombia | Peru | South Africa | Nigeria | Egypt | Kenya | Algeria | Morocco | Tunisia | Ghana | Australia | New Zealand | Russia | Ukraine | Belarus | Kazakhstan | Uzbekistan | Iran | Qatar | Oman | Kuwait | Venezuela | Bolivia | Paraguay | Uruguay | Ethiopia | Tanzania | Zambia | Angola