APPL/CM-2 Rope Coiling Machine

FAQ's

• What rope diameter does the APPL/CM-2 Rope Coiling Machine handle?
  APPL/CM-2 is the first model in the Aawadkrupa Plastomech rope coiling machine range. Our published model list gives the model numbers only, so the rope diameter range is not stated for this model. Each APPL/CM-2 machine is set up to suit the rope the customer produces, and the coiling head and traverse are matched to that rope. Share your rope diameter and coil size with us and we will confirm the exact suitability of the APPL/CM-2.
• What is the coiling and production capacity of the APPL/CM-2?
  Coiling capacity, production output and machine speed figures are not published for the APPL/CM-2 model. Actual output depends on the rope diameter being coiled, the coil length required and the winding speed selected by the operator. The digital length counter meter on the machine lets you set and repeat a fixed coil length so every coil is consistent. Send us your rope specification and required coil length and we will share the expected output for the APPL/CM-2.
• Where is the APPL/CM-2 Rope Coiling Machine used?
  The APPL/CM-2 Rope Coiling Machine is used at the finishing end of rope manufacturing lines, where finished rope is wound into coils for storage, handling, transport and retail packing. It is suitable for synthetic ropes, natural fibre ropes and similar flexible materials. Rope, twine and cordage manufacturers use it to convert loose rope into neat, uniform coils that are easier to stack, weigh and dispatch.
• What are the main benefits of the APPL/CM-2 model?
  The APPL/CM-2 offers a digital length counter meter for accurate coil length, a self-adjustable traverse system and layer to layer uniform winding that produces an excellent finish coil. Its easy operating system means a single operator can run the machine with minimal training, and the simple mechanical construction keeps maintenance requirements low for reliable day to day production.