APPL/OUT-4/816/80 Endless Rope Making Machine 16-32 mm
Product Overview
The APPL/OUT-4/816/80 Endless Rope Making Machine 16-32 mm from Aawadkrupa Plastomech Pvt. Ltd. is a 4 ply machine with a 4 X 20= 80 bobbin configuration, listed in the model table at a rope size of 8MM TO 16MM. It is available in both mechanical and PLC based builds and is the 4 ply option with the higher bobbin count in this range.
APPL/OUT-4/816/80 Endless Rope Making Machine 16-32 mm Manufacturer and Supplier
Endless rope manufacturing runs at 700 RPM on the strand flyer and 350 RPM on the rope flyer, with a Z-type lay, a 15-40 TPM twist range and an infinity take up capacity, so continuous rope production is not limited by the take up package. Consistent twist keeps rope quality even along the full length.
High-quality materials and components give durable construction with low maintenance, and operation is straightforward for experienced operators and newcomers alike, keeping production efficiency high. Rope made on this model suits industrial applications where jointless rope from cotton, hemp, sisal, nylon or polyester is required.
Advantages
1. Continuous Endless Rope:
The APPL/OUT-4/816/80 produces rope without joints or splices along its length. Finished rope runs continuously rather than being limited to fixed lengths.
2. Infinity Take Up Capacity:
The take up section is rated as infinity, so rope length is not capped by the package. Long continuous runs are completed without interruption.
3. Consistent Rope Quality:
Controlled twist keeps rope diameter and lay even from length to length. Finished rope performs predictably in downstream use.
4. 4 X 20= 80 Bobbin Layout:
Twenty sets of four bobbins run in parallel, giving the higher bobbin count of the two models in this range. More rope is produced in the same floor space.
5. Efficient, Reliable Running:
The strand flyer runs at 700 RPM and the rope flyer at 350 RPM, with a 15-40 TPM twist range. Output stays steady through long production hours.
6. Durable Construction:
High-quality materials and components are used throughout the frame, drive and bobbin assembly. The machine stands up to continuous running.
7. Easy Operation & Low Maintenance:
Offered in mechanical or PLC based build, with controls that suit experienced operators and newcomers alike and components that stay accessible for servicing. Training time and routine upkeep both stay short.
Data Sheet
Product Description
Standard configuration of the APPL/OUT-4/816/80 Endless Rope Making Machine 16-32 mm. Every machine can be tailored to your rope size and output.
The model table lists the APPL/OUT-4/816/80 at a rope size of 8MM TO 16MM. Share the rope diameter you need and we will confirm the right configuration from our Endless Rope Making Machine 16-32 mm range.
The APPL/OUT-4/816/80 is a 4 ply machine with a 4 X 20= 80 bobbin configuration and an infinity take up capacity, so rope length is not limited by the take up package. It runs at 700 RPM on the strand flyer and 350 RPM on the rope flyer with a twist range of 15-40 TPM.
It is used to produce continuous rope without joints or splices from natural fibers such as cotton, hemp and sisal and synthetic fibers such as nylon and polyester, for industrial and commercial rope applications.
The APPL/OUT-4/816/80 combines jointless endless rope production with an 80 bobbin layout, an infinity take up capacity, a choice of mechanical or PLC based build, durable construction, easy operation and low maintenance.
